Need a VPN for your router?Get ExpressVPN Now
Love ExpressVPN? Want a free month?Refer a Friend Now
This tutorial will show you how to set up the ExpressVPN app on Asus routers.
Note: The below steps are only for these Asus router models:
Make sure you are using the correct firmware for each model or the setup process will not work. For other router models, see the manual router setup instructions.
1. Download the ExpressVPN firmware
Download the firmware on the ExpressVPN website. From the dropdown menu, select the model of your Asus router.
Click Download Firmware.
Keep this browser window open. You will need the activation code for the setup later.
If you want to install ExpressVPN on an existing router, proceed to installing the ExpressVPN firmware.
2. Power on your router
If you are installing ExpressVPN on an existing router, proceed to installing the ExpressVPN firmware.
If you are installing ExpressVPN on a new router, follow these steps below:
- Attach the antennas to the new router.
- Connect it to a power source but do not connect it to the internet. If you want to use the new router as a secondary router, place it near your existing router.
- Turn on the new router.
- Wait until the router’s power light displays a solid bar.
3. Install the firmware
In your browser’s address bar, enter the IP address for the router admin panel. By default, this is 192.168.1.1 (you can also find it in your device’s settings).
You will be prompted to log in. Enter your Asus router dashboard’s username and password. (The default login/password is admin/admin.)
On the sidebar, click Administration > Firmware Upgrade.
Click Upload, then select the ExpressVPN firmware .trx file you downloaded earlier.
When the firmware upgrade is complete, the screen will read, “Firmware upgrade is done. Please reboot (your Asus router model) manually.”
Restart your router manually.
4. Connect to the internet
Connect your device to the router either via cable or Wi-Fi.
To connect over Wi-Fi, find the network ASUS_(modelname__(revision) (for some hardware: Broadcom_Northstar) and enter the password found on your router.
If you are using a new router that will be used as a secondary router, connect it to the internet by attaching one end of an ethernet cable to its blue port, and the other end of the cable to your existing router.
5. Set up ExpressVPN on your router
You will be taken to the ExpressVPN router dashboard. If you don’t see it, go to www.expressvpnrouter.com. Click Get Started and follow the instructions.
When the setup is complete, keep a note of your Wi-Fi name and password, and your router password.
Your router is now connected to ExpressVPN.