How to use a VPN for Starlink

Satellite internet has become increasingly popular in recent times, especially for those in underserved and remote areas. Among satellite internet providers, Starlink is the undisputed leader. However, it’s exposed to the same risks as any other provider, which is where a VPN can come in handy. Read on to find out how to use a VPN on Starlink.

Jump to…

What is Starlink?
Why do I need a VPN for Starlink?
Best VPN for Starlink
How to get a Starlink VPN
Should I use a free VPN with Starlink?
Starlink VPN troubleshooting

What is Starlink?

Developed and operated by SpaceX, Starlink is a satellite internet network that provides high-speed internet access in over 70 countries. Launched under the vision of Elon Musk, Starlink’s network consists of thousands of low Earth orbit (LEO) satellites working together to deliver fast internet connectivity. If you’re thinking of getting Starlink, here are some pros and cons to take note of.

Advantages of Starlink

• Widespread coverage. Starlink’s constellation of satellites covers 70+ countries and is planned to provide global coverage in the future, reaching remote and rural areas that often lack reliable internet access.
• High-speed internet. Despite being a satellite-based service, Starlink offers high-speed internet comparable to traditional broadband speeds, with much lower latency than previous satellite internet technologies. This is particularly suitable for latency-sensitive activities such as gaming or video calling.
• Easy installation and maintenance. Touted as user-friendly, Starlink’s setup involves just a small satellite dish and modem, allowing for relatively simple self-installation. The dish also automatically aligns itself and even heats to melt snow if necessary.

Disadvantages of Starlink

• Cost. Starlink’s initial setup and monthly subscription fees are higher than many traditional broadband services, making it less accessible for some users. However, it’s still cheaper than conventional satellite-based internet services.
• Weather dependency. Like all satellite communications, severe weather conditions can affect Starlink’s connectivity, leading to potential service interruptions or noticeably reduced speeds.
  
• Limited capacity. Increased demand in densely populated areas can strain the system, potentially affecting speeds and connectivity.

Why do I need a VPN for Starlink?

Using a reliable VPN like ExpressVPN with Starlink, or any other internet provider, can help boost your overall online experience. Here’s how ExpressVPN can benefit Starlink users:

• Boost your privacy and security. ExpressVPN keeps your connection fully encrypted so no one else can see into your online traffic. This is particularly important for Starlink users, as the satellite-based internet connection may be more susceptible to interception than traditional wired connections.
• Bypass censorship. In regions where internet access is heavily censored or monitored, a VPN can help Starlink users avoid government-imposed restrictions. This is particularly relevant for users in remote areas who rely on Starlink as their primary internet connection but face limitations on what they can access online.
• Browse throttle-free. While Starlink aims to provide high-speed internet access globally, you might still encounter bandwidth throttling amid network congestion. ExpressVPN can help manage these issues and potentially improve connection speeds during peak times.

A VPN complements Starlink’s capabilities by ensuring users enjoy a secure, private, and unrestricted internet experience. Whether you’re concerned about privacy, aiming to enhance your security, or want a smoother and more seamless experience, a VPN is a must-have tool for Starlink users.

What is the best VPN for Starlink?

ExpressVPN is the best VPN for Starlink users, offering an optimal blend of speed, security, and ease of use that complements Starlink’s capabilities. Here are some key features of ExpressVPN:

• A vast network of high-speed servers in 105 countries ensures that Starlink users can enjoy stable connections without compromising on speed.
• With best-in-class AES-256 encryption, ExpressVPN secures your internet traffic and protects your data from interception or snooping.
• ExpressVPN offers a strict no-logging policy so you can browse with peace of mind, knowing that your data is for your eyes only.
• ExpressVPN is designed for simplicity, making it easy for anyone to set up and start using with their Starlink connection.
• Should you need assistance, ExpressVPN provides 24/7 customer support to help you resolve any issues quickly, ensuring your Starlink connection remains secure and uninterrupted.

How to get a Starlink VPN

You have two options since the Starlink router doesn’t directly work with VPNs. The first one is to use your Starlink router in “bypass mode” to only work as a modem and use another router as your network router and Wi-Fi access point. The benefit is that you can use a mesh Wi-Fi system to get the best coverage.

If that isn’t an option, you should download the ExpressVPN app on your devices. ExpressVPN has apps for all the most important platforms, so you’ll likely be completely covered. This is pretty straightforward, so we’ll focus on installing the VPN for Starlink on routers.

Before you start

Before starting, you must know that not all routers are natively compatible with VPNs. ExpressVPN has its own router integrated with VPNs, Aircove. If you go for it, you’ll ensure the best compatibility. However, ExpressVPN is also compatible with many other routers, and here you can find the full list. 

If your router isn’t on the list, you could still try to install a third-party firmware to your router, such as DD-WRT or Tomato. Once you have a compatible router, you can start the installation.

Note: This guide assumes you’ve already subscribed to ExpressVPN. If you haven’t done it yet, you can easily subscribe from here.

Step 1. Put your Starlink router on bypass mode

The first thing you need to do is put your Starlink router on bypass mode. This is equivalent to the bridge mode of other routers, and it turns off the Wi-Fi part of the router and makes it act only as a modem. This is important because you’ll be using your other router’s network (wired and Wi-Fi), not Starlink’s. To enable bypass mode, follow these steps:

1. Ensure you have a working internet connection, and log in to your Starlink app.
2. Click on Settings in the home screen. You’ll see the Starlink router settings.
3. Scroll down to Bypass Mode and tap it. You’ll be directed to a page with a slider.
4. Move the slider to the right to enable bypass mode.

Important: The Starlink router doesn’t come with an Ethernet port, which you must connect to the other router. Make sure you have the Starlink Ethernet adapter beforehand.

Step 2. Open your router’s firmware

Once you’ve followed your new router’s instructions, and it’s up and running, you have to open its firmware in your browser. This guide uses a Netgear Nighthawk R6400v2, but the steps are similar for every router.

To open your router’s firmware, type its IP address into your browser. Most routers have a default IP address of 192.168.1.1. You can type this address into your URL bar to open your router’s firmware. If you don’t know your router’s IP address, you can find it by opening a command prompt and typing ipconfig. The entry for Default Gateway points to your router’s IP address.

Step 3: Find the VPN settings

Where your VPN settings are will depend on your router’s model. It’s usually under your router’s firmware’s Advanced or Security section. For example, it’s on Advanced > Administration > Router Update on Netgear routers.

Step 4: Enable the VPN service

This will allow your router to connect to the VPN server, which usually involves clicking a button or checkbox labeled Enable VPN. You may also need to upload the VPN firmware to the router. 

On Netgear, for example, you would need to select the Browse button and upload the VPN firmware you downloaded from ExpressVPN’s website. Once your ExpressVPN firmware is finished uploading to your router, you must log in to the ExpressVPN router setup site and then follow the prompts.  

Step 5: Check if your VPN is working on your router 

Once you’ve enabled the VPN, you should test your connection to ensure it works properly. You can check if your VPN is working on your router by searching Google for “what’s my IP” or a website that checks your IP address, such as whatismyipaddress.com. Verify that the output shown is not your home IP address, and you’re all set!

Should I use a free VPN with Starlink?

As you may already know, nothing is really free. If you’re not paying for a VPN service, you are the product—in this case, your information is. So, while free VPNs might not take your money upfront, they may make you pay in other ways, such as by tracking your activity, serving intrusive ads, or providing less robust features that can leave you vulnerable to data leaks and cyberattacks.

There is no free VPN that matches all that ExpressVPN has to offer, and you can even try us risk-free for 30 days with our money-back guarantee. Here’s what you’ll get with ExpressVPN vs. a typical free VPN:

Troubleshooting a Starlink VPN

If you’ve set up your VPN correctly, the VPN will work flawlessly most of the time, but sometimes, there could be teething problems between these two complex technologies. Here are some common issues with using a Starlink VPN.

Unable to establish a connection with the VPN

If you followed the steps above, Starlink’s router is now only acting as a modem, so it’s likely that Starlink is working fine. You may want to try the following steps:

• Ensure you have an active internet connection. Go to your Starlink app and run a speed test. If you don’t have internet access, try resetting everything.
• Try connecting to a different server location. 
• Check your VPN settings. Return to your router’s firmware (not Starlink’s) to check that everything is in order. Ensure that your VPN is using the Lightway protocol for the fastest, most reliable connection.
• Turn off your firewall or antivirus software. Sometimes, these types of software block your traffic by default. You may need to add the VPN under your firewall exceptions.
• Reinstall the firmware or app. Depending on whether you’re using the VPN on a router or directly on your device, you may need to reinstall it to get everything working.

Random connection drops

It’s expected that a VPN (or any) connection drops every once in a while. This is why ExpressVPN offers a kill switch feature that protects your data if the VPN gets disconnected.

However, if you’re experiencing dropouts with Starlink, the most probable cause is satellite switchover. Starlink positions its satellites in a much lower orbit than a geosynchronous one, unlike traditional satellite internet service providers. This means the satellites move relative to your position, so your dish constantly switches between satellites. Usually, the drops are so short that you don’t notice them, but VPNs could be more sensitive to these micro-disconnections.

Switching to an older VPN protocol (such as IKEv2) could help, as it’s used on mobile networks because of its resiliency and ability to reestablish connections.

Slow connection speeds

All VPNs slow down internet speeds. However, the best VPNs on the market can reduce the slowdowns until they’re almost imperceptible. 

To ensure you get the best speeds, pick a server that’s geographically close to you, as the shorter the distance, the faster your data will reach its destination. If you still have speed problems, ensure you use ExpressVPN’s proprietary Lightway VPN protocol, which is designed for speed.

High latency

Higher latencies are inherent to any satellite internet service because data has to travel greater distances. Starlink is much better in this sense than traditional satellite services, thanks to the lower orbits it uses. If you’re experiencing high latencies, you should try the same solutions for slow connection speeds, so switch to a VPN server closer to you and ensure that you’re using the Lightway VPN protocol.